Product Details
Armouring Wire
Armouring Wire is a soft, heavily Zinc coated wire used in the power, terrestrial and marine communications industry for binding electrical cables which are used in places where the cable maybe subjected to crushing or other injury.
Low carbon armouring wires are produced to meet the requirements of Australian Standard AS 3863 "Galvanised Mild Steel for Armouring Cables"; BS EN 10244 etc. High carbon armouring wires can be produced to customer requirements on request.
Armouring wire is available in diameters ranging from 0.9mm to 8.0mm and is available in either coils or stems.
Armouring Wire Specifications
Diameter Tolerances
Nominal Wire Diameter |
Tolerance (mm) |
over 0.80mm up to and incl. 1.60mm |
+/-0.03 |
over 1.60mm up to and incl. 2.50mm |
+/-0.03 |
over 2.50mm up to and incl. 4.00mm |
+/-0.03 |
over 4.00mm up to and incl. 5.00mm |
+/-0.04 |
over 5.00mm up to and incl. 8.00mm |
+/-0.04 |
Galvanised Coating Weight - AS3863; EN 10244
Wire Diameter |
Minimum Ctg Mass (g/m2) |
0.90mm |
150 |
1.25mm |
200 |
1.60mm |
230 |
2.00mm |
240 |
2.50mm |
260 |
3.15mm |
275 |
4.00mm |
290 |
5.0mm |
320 |
6.0mm |
350 |
8.0mm |
430 |
Tensile Strength (MPa)
The tensile strength is defined as the maximum load achieved in a tensile test divided by the cross sectional area of the wire test piece. The tensile strength range for Armouring Wire is 340 to 500 MPa.
Steel Chemistry
The table below is indicative of steel chemistries used for low carbon Armouring Wire.
Element |
% |
|
Carbon
Phosphorus
Manganese
Silicon
Sulphur
|
0.05 max
0.03 max
0.50 max
0.12/0.18
0.30 max
|
FAQ
1. What is the turnover in 2021
It is about 10 billion US dollars.
2. Do you have a showroom?
Yes, showroom with full range of products.
3. Can you customize for clients?
Yes, we can customize as your need, we have R&D department, our designers can make design for you and our technicians make prototype.
http://www.hytimeswire.com/
Company Profile
